1c docker | Kadmin

Feb 08

Docker 1C

By kadmin 1С, Docker, Kadmin, Linux No Comments

Начинаем с dockerfile, берём за основу Centos 7:

FROM centos:7 as builder
RUN yum -y update
RUN yum-y install epel-release
WORKDIR /opt

FROM centos:7 as builder

RUN yum -y update

RUN yum-y install epel-release

WORKDIR /opt

Добавляем в основу файлы установки, устанавливаем и удаляем. Получаем образ одинэс:

FROM builder AS app
COPY opt/*.tar.gz /opt/
ARG ver1c
RUN yum -y install cabextract lcms2
RUN yum -y install https://downloads.sourceforge.net/project/mscorefonts2/rpms/msttcore-fonts-installer-2.6-1.noarch.rpm
RUN tar zxf *.tar.gz &amp;&amp; /opt/*.run --mode unattended --enable-components server &amp;&amp; rm /opt/*.* -rf
RUN mkdir /var/log/1c/
RUN ln -s /opt/1cv8/x86_64/$ver1c/srv1cv83 /etc/init.d/srv1cv83
RUN ln -s /opt/1cv8/x86_64/$ver1c/srv1cv83.conf /etc/sysconfig/srv1cv83
CMD chown usr1cv8: -R /home/usr1cv8 &amp;&amp; chown usr1cv8: -R /var/log/1c &amp;&amp; /etc/init.d/srv1cv83 start &amp;&amp; /bin/bash

FROM builder AS app

COPY opt/*.tar.gz /opt/

ARG ver1c

RUN yum -y install cabextract lcms2

RUN yum -y install https://downloads.sourceforge.net/project/mscorefonts2/rpms/msttcore-fonts-installer-2.6-1.noarch.rpm

RUN tar zxf *.tar.gz && /opt/*.run --mode unattended --enable-components server && rm /opt/*.* -rf

RUN mkdir /var/log/1c/

RUN ln -s /opt/1cv8/x86_64/$ver1c/srv1cv83 /etc/init.d/srv1cv83

RUN ln -s /opt/1cv8/x86_64/$ver1c/srv1cv83.conf /etc/sysconfig/srv1cv83

CMD chown usr1cv8: -R /home/usr1cv8 && chown usr1cv8: -R /var/log/1c && /etc/init.d/srv1cv83 start && /bin/bash